Puma bežični daljinski upravljač 2.0.

Fokus na mobilnost i industriju – sa hidrauličkim kontrolama

Razvijena da zadovolji mobilni i industrijski hidraulični sektor. Neovisno certificirana po SIL3 standardu. Također zadovoljava CAT3 standard.
Naša ideja je da s Puma sustavom ponudimo kompletno integrirano bežično upravljačko rješenje. Ne samo daljinski upravljač, već i cjelovit koncept, koji se sastoji od sustava daljinskog upravljanja, potrebnog softvera za integraciju i sveobuhvatnog programa za nadzor i konfiguraciju – kompatibilan sa aplikacijama upravljanim industrijskim protokolima.

Puma sustav je razvijen posebno, ali ne i ekskluzivno, za mobilno hidraulično tržište. U mnogim takvim primjenama se nalazu ventili koji kontroliraju glavne funkcije. U takvom području trebate pouzdano i sigurno rješenje daljinskog upravljanja. Neovisno da li trebate bežično rješenje na kamionu ili morate upravljati dizalicom daljinski mi imamo rješenje za vaše potrebe.

Naš cilj je isporučiti najbolje i najučinkovitije, te prilagodljivo rješenje upravljanja za industrijsko i mobilno tržište.

Radujemo se što ćemo Vam pružiti inovativno rješenje za vaše potrebe upravljanja.

Joystick transmitters

We currently offer three different variations of joystick platforms. The smaller T26 with a display, the larger T24 with display and the T28* with a large display all of them in full colour. All of the joysticks come with illuminated faceplate, “operator presence” detection, impact/drop/tilt detection, Bluetooth for data transfer features and haptic feedback. The T24 size have two batteries for hot-swapping operation. There are no standard layouts, all joysticks will be configured to your exact specifications down to the very last button, joystick or paddle. The faceplate can be customized with either full colour print or engraved, the choice is yours.

(*not yet available.)

Puma predajnik, T26-6
2,4 GHz
HY-T26-6
Puma predajnik, T24-1
2,4 GHz
HY-T24-1
Puma predajnik, T26-1
2,4 GHz
HY-T26-1
Puma predajnik, T26-7
2,4 GHz
HY-T26-7
Puma predajnik, T26-81
2,4 GHz
HY-T26-81
Puma predajnik, T24-6
2,4 GHz
HY-T24-6
Puma predajnik, T24-7
2,4 GHz
HY-T24-7

Receivers

The Puma receivers come in a small footprint but with an impressive feature list. We currently offer two different kinds, the R21 in a standard mountable casing with M12 male or female connector or an M20 cable gland. The R20 is a plug-in type with either 23/35 pin connectors or M25 cable gland. Both receivers have the ability of CAN (J1939 or CANopen) or RS485 and expansion boards that enables more in/outputs and relays. Both receivers have internal antennas, overload protection, fail-safe and redundant E-stop relays and Bluetooth communication.

Puma prijemnik, R21-1
2,4 GHz
HY-R21-1
Puma prijemnik, R20-1
2,4 GHz
HY-R20-1
Puma prijemnik, R20-2
2,4 GHz
HY-R20-2
Puma prijemnik, R20-3
2,4 GHz
HY-R20-R3
Puma prijemnik, R20-4
2,4 GHz
HY-R20-4

Active antenna

We realize that during certain difficult situations it could be hard to reach your machine, which is why we also offer a repeater solution meaning you can extend your range indefinitely. This is very useful when working in a mining environment, underground or over very long distances. Click here for more information.