![\"AT17LV256-10PU](\"https:\/\/s3-eu-west-1.amazonaws.com\/enrgtech-images\/full\/4aee8495148cfc8b23aba0c7dbccd7b1c1f662c7.jpg\")
<\/p>\n<\/p>\n
Removable memory chips (EEPROM) were very popular in the past<\/strong>, as they allowed users to manipulate different features and configurations, applying them to remote control devices. \u00a0It was a good feature, as the card was the Transmitter\u2019s \u201cbrain\u201d and any particular configuration of the device was stored therein. Nevertheless, using an external chip can easily lead to different problems<\/strong>. When damaged or lost, it is no longer possible to reconfigure a unit and put it easily back into operation. An additional challenge with this chip as separate item, is the possibility of prolonged lead times.<\/p>\n Tele Radio devices do not use removable chips<\/strong>,\u00a0instead built-in smart functions<\/strong> as part of the software, in both transmitter and receiver, making the replacement procedure much more intuitive and direct, executable by the end user on-site. \u00a0It is not necessary to use a PC\/laptop, or any other hardware. You don’t need to contact your dealer for assistance either.<\/p>\n The steps to replace a damaged or lost transmitter are simpler and faster with the built-in techonology. <\/strong>Just need to press a combination of buttons that will allow the transmitter to be registered safely and wirelessly into the receiver.<\/p>\n It can be done in 2 different ways:<\/p>\n Each transmitter has a unique and dedicated Replace ID code<\/strong>, <\/u>located underneath the protective Rubber Guard, above the battery compartment. To replace a defective Transmitter in about 15 seconds, simply enter the menu mode, accessible directly from the new Transmitter. Then use the push buttons to enter the ID Code of the Transmitter that is to be replaced.\u00a0 The new Transmitter will pair itself to the Receiver, automatically erasing the unit that was replaced.<\/p>\n This is the faster procedure and the code of the -to be replaced- transmitter must be pressed within a sequence in a built-in menu, these steps delete the first device\u00b4s ID and registers the new transmitter\u00b4s ID instead. From that moment, it will only be stored the new ID code and just allow to work that new transmitter.<\/em><\/p>\n Click to play the video.<\/p>\nReplacing a damaged or lost Transmitter<\/a> that uses this technology, requires re-programming a new memory card. This is only possible with the help of a PC or Laptop, which can be quite time consuming.<\/p>\n
REPLACE MODE\u00a0<\/strong>(requires the ID code of the Transmitter that is to be replaced)<\/h3>\n
![\"\"](\"https:\/\/www.tele-radio.com\/app\/uploads\/Captura-de-pantalla-2020-04-08-a-las-16.18.54-1.png\")
<\/a><\/p>\n![\"\"](\"https:\/\/www.tele-radio.com\/app\/uploads\/Captura-de-pantalla-2020-04-08-a-las-16.19.19.png\")
<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"