Feedback
All Tiger transmitters can receive feedback from various field bus systems (CANopen, Profibus or Modbus/TCP), weight indication system or internal feedback from the receiver itself (digital inputs). The feedback can be indicated on LEDs, the internal buzzer and the transmitters display. In the transmitters with display it can be displayed as images – for example a logotype, as symbols or as text depending on your requirements and needs. An important safety aspect is that Machine ID/Crane ID now can be set in the receiver and be sent as feedback to the transmitter.


Configurable functional relays
The functional relays of the Tiger receivers are extremely flexible. All functional relays, maximum 28, can be configured to your requirements and needs or used with standard settings.


Joysticks
The joysticks on the Tiger joystick transmitter have been updated. Both joysticks can now be controlled in x- and y-axis, that is (x,y) (2,2) + (2,2) or (x,y) (4,4) + (4,4). If needed there is possibility to block the right joystick in x-axis, that is (x,y) (2,2) + (0,2) or (x,y) (4,4) + (0,4).

Feedback can be displayed in several ways, in this case with an image of a logotype
 

Weight indication
Weight indication is possible by adding an extern module to the receiver. Each module has two channels and can receive analogue signals of 0-10V, 4-20 mA or 0-20 mA for weight indication. The receiver can receive up to 16 weight values where each value can indicate under/overload and trigger overload protection. Both the modules and the receiver can be configured to be adapted to your weight system.


Load selections
The number of load selections has increased and can be configured on all Tiger transmitters. If required, there is also a possibility to forbid some combinations of load selections.